October 17, 2019
8:28 AM

Construction Department  
Whole-House Stand-by Generator Requirements  
Print this page Print this page Email this page Email this page

Page Navigation


Whole-House Emergency Generator Installation Requirements

1.  Zoning Permit Application — Submit this application with a copy of a survey indicating the proposed placement of the generator along with the fee of $30 (cash or check).

2.  Construction Permit Application Folder — If the lead contractor for the work is not a licensed plumber, licensed electrician or the homeowner, the lead contractor acting as the agent for the homeowner must be registered with the Stat of New Jersey as a Home Improvement Contractor.

3.  Manufacturer's Specifications for the Generator

4.  Gas Riser Drawing with pipe sizes

5.  Small Construction Permit Form

6.  Plumbing Subcode Form — signed and sealed by a licensed plumbing contractor.

7.  Electrical Subcode Form — signed and sealed by licensed electrical contractor.

8.  Building Subcode Form — This is submitted only when the generator will be placed on a poured slab. The contractor must be registered with the State of New Jersey as a Home Improvement Contractor.

Submit the entire packet to the Building Department for processing. If you want to receive Zoning approval prior to submission of the Construction Permit Application, you may submit the Zoning Permit Application, survey and fee to the Zoning Officer.

Building Department plan review will commence when documentation of Zoning Approval is received.

Copyright © 2009 Borough of Mendham, NJ. All Rights Reserved.

Powered by Cit-e-Net