FURNACE REPLACEMENT

(in existing one & two family dwellings only)

1. Furnace replacement with no change in fuel type, no relocation, no significant change in ductwork -Submit Construction Permit Application folder completed and signed, signed & sealed Mechanical and Electric Subcode Forms with chimney verification form.

2. Furnace replacement as in # I, with new installation of air conditioning condenser plus "A" coil-Submit signed & sealed Electric and Mechanical Subcode Forms with chimney verification. Zoning Application for outdoor condenser unit with survey indicating location.

3. Replacement of existing furnace, no change in location, but change in fuel type - Submit Construction Permit Application folder completed and signed, signed & sealed Mechanical and Electric with chimney verification.

4. Replacement of existing boiler with no change in fuel type or location, Submit Construction Permit Application folder completed and signed, signed & sealed Electrical and Mechanical signed & sealed by licensed professional (If replacing backflow preventer, must list under other) with chimney verification.

5. Replacement and relocation of furnace - Submit Construction Permit Application folder completed and signed, signed & sealed Electric and mechanical with chimney verification.

6. NOTE: If installing a chimney liner, you must Submit a Mechanical Subcode Form and indicate a liner under "other" and include a spec sheet for the liner.

NOTE: FOR NEW CONSTRUCTION AND ADDITIONS: Construction Permit Application folder completed and signed, Signed and Sealed Electric, Plumbing and Fire Subcodes are required.